TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 266 of 1268
TM 9-2320-365-20-3 7-7. STARTING MOTOR REPLACEMENT (CONT) WARNING Starting motor weighs approximately 60 lbs (27 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (7) requires the aid of an assistant. (7) Position starting motor (5) in flywheel housing (7) with two screws (8). (8) Position screw (9) in starting motor (5). (9) Tighten two screws (8) and screw (9) to 47 lb-ft (64 N·m). NOTE Perform step (10) through (21) on vehicles that have not had connector P81 removed. (10) Cut connector P81 (10) from start and charging cable assembly (11). (11) Remove band marker (12) from start and charging cable assembly (11). NOTE Remove electrical tape as required. (12) Remove convoluted tubing (13) from two wires (14 and 15). (13) Remove insulation sleeving (16) from two wires (14 and 15). 7-28 Change 1