TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 263 of 1268
TM 9-2320-365-20-3 7-7. STARTING MOTOR REPLACEMENT This task covers: a. Deleted b. Removal c. Installation d. Follow-On Maintenance INITIAL SETUP Equipment Conditions Cab raised (TM 9-2320-365-10). Batteries disconnected (para 7-48). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Sling, Endless (Item 32, Appendix C) Wrench Set, Socket (Item 49, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Adapter, Socket Wrench (Item 2, Appendix B) Heater, Gun Type, Electric (Item 20, Appendix B) Crowfoot Attachment, Socket Wrench (Item 9, Appendix B) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Adhesive (Item 8, Appendix D) Adhesive (Item 10, Appendix D) Bolt, Machine (3) (Item 2, Appendix G) Gasket (Item 40, Appendix G) Splice, Conductor (Item 261, Appendix G) Tape, Insulation, Electrical (Item 75, Appendix D) Insulation, Sleeving, Electrical (Item 30.1, Appendix D) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Deleted. b. Removal. NOTE Tag wires and connection points prior to disconnecting. (1) Remove adhesive, nut (1), terminal lugs TL55 (2) and TL12 (3) from solenoid terminal (4). (2) Position nut (1) on solenoid terminal (4). (3) Remove adhesive, nut (5), and terminal lug TL26 (6) from solenoid terminal (7). (4) Position nut (5) on solenoid terminal (7). Change 1 7-25