TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 256 of 1268
TM 9-2320-365-20-3 7-18 Change 2 7-5. 100 AMP VOLTAGE REGULATOR REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Cab raised (TM 9-2320-365-10). Batteries disconnected (para 7-48). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Lockwasher (2) (Item 100, Appendix G) Nut, Self-Locking (Item 130, Appendix G) Nut, Self-Locking (Item 131, Appendix G) Sealing Compound (Item 64, Appendix D) Tape, Insulation Electrical (Item 75, Appendix D) Tie, Cable, Plastic (Item 76, Appendix D) a. Removal. (1) Lift dust boot (1) on terminal lug TL35 (2). (2) Remove self-locking nut (3), washer (4), and terminal lug TL35 (2) from voltage regulator (5). Discard self- locking nut. (3) Lift dust boot (6) on terminal lug TL110 (7). (4) Remove self-locking nut (8), washer (9), and terminal lug TL110 (7) from voltage regulator (5). Discard self-locking nut. NOTE Tag wires and connection points prior to disconnecting. NOTE Perform steps (3) and (4) on vehicles equipped with alternator P/N N1506-1 (12420852).