TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 254 of 1268
TM 9-2320-365-20-3 7-4. ALTERNATOR BRACKETS REPLACEMENT (CONT) d. Belt Take-Up Bracket Installation. (1) Position alternator belt take-up mounting bracket (1) on engine front cover (2) with two screws (3). (2) Position three screws (4) in engine front cover (2). (3) Tighten two screws (3) to 121-147 lb-ft (164-200 N·m). (4) Tighten three screws (4) to 106-130 lb-ft (144-176 N·m). (5) Install alternator belt take-up plate (5) on alternator belt take-up mounting bracket (1) with washer (6) and screw (7). (6) Install washer (8) and screw (9) in alternator belt take-up plate (5). NOTE • Steps (7) and (8) require the aid of an assistant. • Use square hole in water pump belt pulley bracket to apply and maintain tension on water pump belt while adjusting belt tension. (7) Adjust tension on water pump belt (10) to 80-100 lbs (356-444 N). (8) Tighten two screws (11) to 35 lb-ft (47 N·m). 7-16