TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 221 of 1268
TM 9-2320-365-20-3 Change 2 6-63 6-12. WATER PUMP AND FITTINGS REPLACEMENT This task covers: a. Water Pump Removal b. Water Pump Installation c. Fittings Removal d. Fittings Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions 100 amp alternator removed, if equipped (para 7-2). 200 amp alternator removed, if equipped (para 20-56). Alternator brackets removed (para 7-4). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Container (52 qt (50 L) capacity) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-75 lb-in. (Item 86, Appendix B) Wrench, Adjustable, Automotive (Item 51, Appendix C) Gage, Belt Tension (Item 16, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Materials/Parts Packing, Preformed (Item 172, Appendix G) Packing, Preformed (Item 191, Appendix G) Packing, Preformed (3) (Item 182, Appendix G) Packing, Preformed (2) (Item 179, Appendix G) Antifreeze, Ethylene Glycol, Permanent (Item 12, Appendix D) a. Water Pump Removal. (1) Position container under radiator (1). (2) Remove radiator cap (2) from radiator overflow tank (3). (3) Open radiator draincock (4) and drain coolant. (4) Close radiator draincock (4). WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel