TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 188 of 1268
TM 9-2320-365-20-3 6-6. THERMOSTAT HOUSING REPLACEMENT (CONT) b. Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash with soap and water. Failure to comply may result in injury to personnel. (1) Apply adhesive to threads of tee fitting (1) and fittings (2 and 3). (2) Install fitting (2) in tee fitting (1). (3) Install tee fitting (1) in thermostat housing (4). (4) Install fitting (3) in thermostat housing (4). (5) Install preformed packing (5) on 90-degree fitting (6). (6) Install 90-degree fitting (6) in thermostat housing (4). (7) Apply adhesive to surfaces of thermostat housing (4) and engine block (7). (8) Position gasket (8) on engine block (7). (9) Install thermostat housing (4) on engine block (7) with two screws (9). 6-30