TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 184 of 1268
TM 9-2320-365-20-3 6-5. THERMOSTAT REPLACEMENT (CONT) b. Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply adhesive to thermostat housing surface (1). (2) Position thermostat gasket (2) on thermostat housing (1). (3) Install thermostat (3) with long end up. (4) Apply adhesive to outlet housing (4) mating surface. (5) Install outlet housing (4) on thermostat housing (1) with two washers (5) and screws (6). c. Follow-On Maintenance. (1) Lower cab (TM 9-2320-365-10). (2) Add coolant to bottom of radiator overflow tank filler neck (TM 9-2320-365-10). (3) Check for coolant leaks under vehicle. (4) Start engine (TM 9-2320-365-10). (5) Check coolant level after normal operating temperature is reached. Add coolant as required (TM 9-2320-365- 10). (6) Raise cab (TM 9-2320-365-10). 6-26