TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 173 of 1268
TM 9-2320-365-20-3 b. Top Radiator Fan Shroud Installation. (1) Install coupling (1) in top radiator fan shroud (2) with washer (3) and nut (4). WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (2) Apply sealing compound to threads of 90-degree fitting (5) and fitting (6). (3) Install fitting (6) in pipe coupling (1). (4) Install 90-degree fitting (5) in pipe coupling (1). (5) Position top radiator fan shroud (2) on vehicle. WARNING Adhesive sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (6) Apply sealing compound to threads of screw (7). (7) Position washer (8) and screw (7) on right side of radiator fan shroud (2). (8) Tighten screw (7) to 84-108 lb-in. (10-12 N·m). (9) Position fan clutch hose (9), clamp (10), six washers (11), three screws (12) and self-locking nuts (13) on right side of top radiator fan shroud (2). (10) Tighten three self-locking nuts (13) to 84-108 lb-in. (10- 12 N·m). Change 1 6-17