TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download

Page 146 of 1268

TM 9-2320-365-20-3 5-3. EXHAUST PIPE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Materials/Parts Nut, Self-Locking (4) (Item 140, Appendix G) Nut, Self-Locking (3) (Item 119, Appendix G) WARNING Ensure exhaust system is cool before performing maintenance. Failure to comply may result in injury to personnel. Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. Do not operate vehicle with exhaust pipe removed. Toxic exhaust fumes may enter cab, resulting in serious injury or death to personnel. a. Removal. (1) Remove self-locking nut (1) from clamp (2). Discard self- locking nut. (2) Disconnect exhaust pipe (3) from muffler (4). (3) Remove clamp (2) from exhaust pipe (3). 5-8 Change 1