TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 125 of 1268
TM 9-2320-365-20-3 c. Adjustment. (1) Raise cab (TM 9-2320-365-10). CAUTION Ensure governor linkage rests against low idle stop with throttle control cable installed. Failure to comply may result in damage to equipment. NOTE Perform steps (2) and (3) if governor linkage does not contact low idle stop with throttle control cable installed. (2) Loosen nut (1) on throttle control cable (2) until governor linkage (3) contacts low idle stop (4). (3) Tighten nut (5) on throttle control cable (2). WARNING Use extreme care when opening cab door with cab raised. Failure to comply may result in injury to personnel or damage to equipment. CAUTION Ensure governor linkage contacts high idle stop with accelerator pedal fully depressed. Failure to comply may result in damage to equipment. NOTE Steps (4) through (7) require the aid of an assistant. (4) Depress accelerator pedal (6) to cab floor (7). 4-93