TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 119 of 1268
TM 9-2320-365-20-3 4-17. HAND THROTTLE LEVER REPLACEMENT/ADJUSTMENT This task covers: a. Removal b. Installation/Adjustment c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Instrument panel assembly removed for access (para 7-15). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Scale, Weighing (Item 30, Appendix C) Materials/Parts Washer, Spring (Item 281, Appendix G) a. Removal. Remove nut (1), washer (2), spring washer (3), HAND THROTTLE lever (4), and friction disk (5) from dashboard (6). Discard spring washer. b. Installation/Adjustment. WARNING Tab of HAND THROTTLE lever must be positioned above throttle pivot bar. Failure to comply may result in injury to personnel or damage to equipment. (1) Position friction disk (5), HAND THROTTLE lever (4), spring washer (3), washer (2), and nut (1) on dashboard (6). CAUTION HAND THROTTLE lever nut must be tightened so that 9-11 lbs (40-49 N) of force is required to change position of HAND THROTTLE lever. Failure to comply may result in damage to equipment. (2) Tighten nut (1) on HAND THROTTLE lever (4). 4-87