TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 117 of 1268
TM 9-2320-365-20-3 4-16. THROTTLE POSITION SENSOR (TPS) CABLE ASSEMBLY REPLACEMENT This task covers: a. Removal b. Installation INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). Cab raised (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Materials/Parts Pin, Cotter (Item 202, Appendix G) a. Removal. (1) Disconnect electrical connector (1) from TPS cable assembly (2). (2) Remove three nuts (3), washers (4), screws (5), and TPS cable assembly (2) from bracket (6). (3) Remove cotter pin (7) and washer (8) from stud (9). Discard cotter pin. (4) Remove TPS cable assembly (2) from stud (9). (5) Release latch (10) on clamp (11). (6) Remove TPS cable assembly (2) from clamp (11). (7) Remove TPS cable assembly (2) from engine. 4-85