TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 114 of 1268
TM 9-2320-365-20-3 4-15. ETHER STARTING AID REPLACEMENT This task covers: a. Ether Cylinder Removal b. Ether Cylinder Installation c. Clamp Removal d. Clamp Installation e. Ether Valve Removal f. Ether Valve Installation g. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (para 7-48). Spare tire lowered (TM 9-2320-365-10). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Materials/Parts Gasket (Item 25, Appendix G) Nut, Self-Locking (4) (Item 138, Appendix G) WARNING Starting fluid is toxic and highly flamma- ble. Container is pressurized. NEVER heat container and NEVER discharge starting fluid in confined areas or near open flame. Failure to comply may cause serious injury or death to personnel. a. Ether Cylinder Removal. (1) Remove wingnut (1) from clamp (2). (2) Remove ether cylinder (3) and gasket (4) from ether valve (5). Discard gasket. (3) Remove ether cylinder (3) from clamp (2). (4) Remove cap (6) from cap retainer (7). (5) Install cap (6) on ether valve (5). 4-82 Change 1