TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download

Page 104 of 1268

TM 9-2320-365-20-3 4-13. FUEL/WATER SEPARATOR AND FILTER REPLACEMENT This task covers: a. Filter Removal b. Filter Installation c. Pump Head Removal d. Pump Head Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Cab raised (TM 9-2320-365-10). Batteries disconnected (para 7-48). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Pan, Drain (Item 24, Appendix C) Materials/Parts Cloth, Cleaning (Item 17, Appendix D) Filter Element, Fluid (Item 14, Appendix G) Oil, Fuel, Diesel (Item 37, 38, or 39, Appendix D) Packing, Preformed (2) (Item 177, Appendix G) WARNING Diesel fuel is flammable. If fuel is spilled, clean it up immediately. Failure to comply may result in serious injury or death to personnel. a. Filter Removal. (1) Disconnect connector clamp (1) from fuel/water separator connector (2). (2) Disconnect connector P33 (3) from fuel/water separator connector (2). (3) Position drain pan under hose (4). (4) Open drain valve (5) and allow fuel to drain. (5) Loosen clamp (6) on hose (4). (6) Remove hose (4) from drain valve (5). 4-72