TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 1038 of 1268
TM TM 9-2320-365-20-3 9-2320-365-20-3 15-5. REAR STABILIZER BAR REPLACEMENT/REPAIR (CONT) NOTE Both rear stabilizer bar attachments are removed the same way. Right side shown. (2) Remove self-locking nut (2), bolt (3), two washers (4), and washer (5) from frame bracket (6). Discard self- locking nut. (3) Remove self-locking nut (7) and bolt (8) from axle bracket (9). Discard self-locking nut. (4) Perform steps (2) and (3) on left side rear stabilizer bar attachments. WARNING Rear stabilizer bar weighs approximately 50 lbs (22 Kg). Rear stabilizer bar must be supported during removal. Failure to comply may result in serious injury to personnel or damage to equipment. NOTE Step (5) requires the aid of an assistant. (5) Remove rear stabilizer bar (1) from vehicle. 15-8 15-8