TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 1037 of 1268
TM TM 9-2320-365-20-3 9-2320-365-20-3 15-5. REAR STABILIZER BAR REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Goggles, Industrial (Item 15, Appendix C) Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Trestle, Motor Vehicle Maintenance (2) (Item 45, Appendix C) Wrench, Torque, 0-600 lb-ft (Item 59, Appendix C) Tools and Special Tools (Cont) Socket, Socket Wrench (Item 68, Appendix B) Wrench Set, Socket (Item 48, Appendix C) Materials/Parts Nut, Self-Locking (4) (Item 145, Appendix G) Nut, Self-Locking (4) (Item 144, Appendix G) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. (1) Position trestles under rear stabilizer bar (1). 15-7 15-7