TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 1031 of 1268
TM 9-2320-365-20-3 Change 2 15-2.3/(15-2.4 Blank) g. Front Leaf Spring Resilient Mount Removal (1) Install C-Clamp on leaf spring (1). (2) Remove resilient mount (2) and spacer (3) from bolt (4). h. Front Leaf Spring Resilient Mount Installation (1) Install C-Clamp on leaf spring (1). (2) Apply sealing compound to threads of bolt (2). (3) Position spacer (3) and resilient mount (4) on bolt (2). (4) Tighten resilient mount (4) 1 ½turns after contact with plate (5) (5) Remove C-Clamp from leaf spring (1). WARNING WARNING Use care when removing resilient mount from leaf spring. Spring is under tension and can act as a projectile if released. Failure to comply may result in injury to personnel or damage to equipment, NOTE If vehicle has resilient mounts attached with screws and washers, notify DS to install four kits P/N 57K2003 on vehicle. Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. NOTE If vehicle has resilient mounts attached with screws and washers, notify DS to install four kits P/N 57K2003 on vehicle.