TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 1010 of 1268
TM 9-2320-365-20-3 14-5. SPARE TIRE RETAINER REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-on Maintenance INITIAL SETUP Equipment Conditions Spare tire removed (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Hydraulic manifold removed (para 19-4). Tool box removed (para 16-16). Cab leveling valve removed (para 16-8). Air/hydraulic power unit and bracket removed (para 19-3). Ether starting aid removed (para 4-15). Shunt removed (para 7-26). 100 amp reverse polarity relay removed, if equipped (para 7-27). 200 amp reverse polarity relay removed, if equipped (M1081 only) (para 20-58). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Pan, Drain (Item 24, Appendix C) Gloves, Rubber (Item 13, Appendix C) Tools and Special Tools (Cont) Goggles, Industrial (Item 15, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Materials/Parts Cap and Plug Set (Item 15, Appendix D) Dispenser, Pressure Sensitive Adhesive Tape (Item 21, Appendix D) Ties, Cable, Plastic (Item 76, Appendix D) Nut, Self-Locking (12) (Item 140, Appendix G) Nut, Self-Locking (Item 142, Appendix G) Pin, Cotter (2) (Item 207, Appendix G) Personnel Required (3) a. Removal. CAUTION Cap or plug intake air cleaner hoses to prevent contamination of turbocharger. Failure to comply may result in damage to turbocharger and engine. (1) Loosen clamp (1) on intake air cleaner boot (2). (2) Disconnect intake air cleaner boot (2) from intake air cleaner housing (3). (3) Loosen clamp (4) on air compressor intake hose (5). (4) Disconnect air compressor intake hose (5) from intake air cleaner boot (2). 14-22