TM-9-2320-365-20-3 LMTV Unit Maintenance Manual M1078 Series - Volume 3 Download
Page 101 of 1268
TM 9-2320-365-20-3 4-12. GOVERNOR LINKAGE REPLACEMENT This task covers: a. Removal b. Disassembly c. Assembly d. Installation e. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Materials/Parts Pin, Cotter (Item 202, Appendix G) Spacer, Ring (Item 260, Appendix G) a. Removal. (1) Remove cotter pin (1), washer (2), and TPS cable assembly (3) from stud (4). Discard cotter pin. (2) Remove clip (5) and throttle control cable (6) from stud (7). NOTE Note position of two springs prior to removal. (3) Remove springs (8 and 9) from linkage plate (10). (4) Remove bolt (11), washer (12), and linkage plate (10) from governor (13). (5) Remove bolt (14), washer (15), and sensor bracket (16) from governor (13). Change 1 4-69