TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 959 of 1432
TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 2-1923/(2-1924 Blank) 2-1923/(2-1924 Blank) 2-1923/(2-1924 Blank) 2-1923/(2-1924 Blank) 2-1923/(2-1924 Blank) STEERING GEAR TEST NOTE An alignment mark shall be made on yoke and steering gear assembly shaft prior to disassembly to ensure proper alignment during installation. (1) Remove bolt and locknut from lower yoke of steering gear arm. Discard locknut. (2) Remove yoke from top steering gear assembly shaft. (3) Remove drag link (para 13-3). (4) Turn pitman arm to check for binding and proper output. Notify DS maintenance if steering gear assembly fails to turn smoothly or if it binds when top shaft is turned. (5) Install drag link (para 13-3). (6) Position yoke on to steering gear assembly. (7) Install bolt and locknut into yoke to top steering gear assembly shaft. (8) Lower cab (TM 9-2320-365-10).