TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 95 of 1432
TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 2-1149 2-1149 2-1149 2-1149 2-1149 CONTINUITY TEST (1) Open door on 110/208 VAC POWER DISTRIBUTION PANEL (TM 9-2320-365-10). (2) Position circuit breaker CB1 to OFF (TM 9-2320-365-10). (3) Remove two screws and cover from INTERIOR LIGHTS switch outlet box. (4) Remove diffuser from lighting fixture DS83. (5) Remove tube lock holder from each end of two fluorescent lamps. (6) Remove two fluorescent lamps from lighting fixture DS83. (7) Remove ballast cover from lighting fixture DS83. (8) Set multimeter to ohms. (9) Connect positive (+) probe of multimeter to bottom left pole of INTERIOR LIGHTS switch S32. (10) Connect negative (-) probe of multimeter to wire 706B in lighting fixture DS83 and note reading on multimeter. (11) If continuity is not present, repair or replace wire 706B from lighting fixture DS83 to DS82 (para 2-40). (12) Install cover on INTERIOR LIGHTS switch outlet box S32 with two screws.