TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 945 of 1432
TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 2-1909 2-1909 2-1909 2-1909 2-1909 An alignment mark shall be marked on yoke and steering gear assembly to ensure ease during installation. NOTE STEERING GEAR TEST (1) Check power steering pump for leaks, and for loose, missing, or damaged mounting hardware. (2) Lower cab (TM 9-2320-365-10). (3) Shut down engine (TM 9-2320-365-10). (4) Raise cab (TM 9-2320-365-10). (1) Remove bolt and self-locking nut from lower yoke of steering gear arm. Discard self- locking nut. (2) Remove yoke from top steering gear assembly shaft. (3) Remove drag link (para 13-3). (4) Turn top steering gear assembly shaft to check for binding and proper output. Notify DS maintenance if steering gear assembly fails to turn smoothly or if it binds when top shaft is turned. (5) Install drag link (para 13-3). (6) Position yoke onto top steering gear assembly shaft. (7) Install bolt and self-locking nut into yoke to secure yoke to top steering gear assembly shaft.