TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 927 of 1432
TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to connector PX7-9. (3) Connect negative (-) probe of multimeter to connector J111D and note reading on multimeter. (4) If continuity is not present, repair wire 1528 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (5) Connect lighted indicator display to connector PX7. (6) Position lighted indicator display in instrument panel assembly with four screws. (7) Tighten four screws to 6-10 lb-in. (1 N·m). 2-1891 2-1891 2-1891 2-1891 2-1891