TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 627 of 1432
Change 1 2-1601/(2-1602 Blank) TM 9-2320-365-20-2 (1) Check drive shaft for excessive movement at universal joints. (2) If universal joint(s) shows any movement, replace universal joint(s) (para 9-2). (1) Perform drive shaft hinging inspection (para 9-3). (2) Visually inspect drive shaft for damaged slip yoke, bent/dented tubing, or missing balance weights. (3) If drive shaft does not pass hinging inspection or visual inspection, replace drive shaft (para 9-2).