Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download

Page 579 of 1432

(1) Remove kick panel (para 16-3). (2) Disconnect connector clamp from connector P115. (3) Disconnect connector P115 from WTEC III transmission ECU. (4) Set multimeter to ohms. (5) Connect positive (+) probe of multimeter to connector P115-1. (6) Connect negative (-) probe of multimeter to all other sockets in connector P115 except P115-16), one at a time, and note reading on multimeter. (7) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (8) Connect positive (+) probe of multimeter to connector P115-16. (9) Connect negative (-) probe of multimeter to all other sockets in connector P115 (except P115-1), one at a time, and note reading on multimeter. (10) Connect negative (-) probe of multimeter to ground and note reading on multimeter. CONTINUITY TEST Change 1 2-1583 TM 9-2320-365-20-2 (11) If continuity is present repair wire 136 (para 2-40) or replace WTEC III dashboard cable assembly (para 7-11).