Sign up to sell your inventory with NSN Lookup

TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download

Page 577 of 1432

(1) Check to see if main code 13 sub code 12 is active in WTEC III TPSS (para 8-5). (2) If main code 13 sub code 12 is not active in WTEC III TPSS, go to step 7 of this fault. Change 1 2-1581 TM 9-2320-365-20-2 Inspect connector pins/sockets for damage, corrosion, and serviceability. Check that connector pins are not pushed back and are capable of making good contact. Use care when testing electrical connectors. Do not damage connector pins or sockets with multimeter probes. Failure to comply may result in damage to equipment. Loose or dirty connectors may cause intermittent loss of power to transmission ECU and diagnostic codes to be logged. Ensure that all connectors are clean and tight before performing troubleshooting. Failure to comply may result in incorrect test results. CAUTION NOTE