TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 510 of 1432
Replace WTEC III cab transmission harness (para 7-87). YES NO 1. Is continuity present from connector J119j to connector P114-12 and absent from J119j to all other P114 sockets and ground? CAUTION Read CAUTION on following page. TEST OPTIONS Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION If continuity is not present from connector J119j to connector P114-12, or continuity is present from J119j to any other P114 sockets or ground, WTEC III cab transmission harness is faulty. KNOWN INFO Fuse OK. Batteries OK. POSSIBLE PROBLEMS Faulty WTEC III cab transmission harness. Faulty WTEC III transmission ECU. Tools and Special Tools Wrench Set, Socket (Item 49, Appendix C) STE/ICE-R (Item 39, Appendix C) References TM 9-4910-571-12&P INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Multimeter, Digital (Item 22, Appendix C) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) START 2-1516 Change 1 TM 9-2320-365-20-2 f26. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE 32 AND ANY SUB CODE