TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 49 of 1432
TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 2-1103 2-1103 2-1103 2-1103 2-1103 CONTINUITY TEST CONTINUITY TEST (1) Remove kick panel (para 16-3). (2) Disconnect connector P108 from connector J108. (3) Set multimeter to ohms. (4) Connect positive (+) probe of multimeter to connector P173C. (5) Connect negative (-) probe of multimeter to connector P108-4 and note reading on multimeter. (6) If continuity is not present, repair wire 2040 (para 2-40) or replace M1079 12/24 vdc power cable (para 7-51). (7) Connect connector P173 to connector J173. (1) Remove personnel heater (para 18-9). (2) Disconnect connector J912 from connector P912. (3) Set multimeter to ohms. (4) Connect positive (+) probe of multimeter to connector J108-4. (5) Connect negative (-) probe of multimeter to connector J912-10 and note reading on multimeter. (6) If continuity is not present, repair wire 2040 (para 2-40) or replace auxilliary panel cable assembly (all models except M1079 w/o winch) (para 7-49) or M1079 w/o winch auxiliary panel cable assembly (para 7-50). (7) If continuity is present, repair wire 2040 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (8) Connect connector J912 to connector P912. (9) Connect connector P108 to connector J108. (10) Install personnel heater (para 18-9).