TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 47 of 1432
TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 2-1101 2-1101 2-1101 2-1101 2-1101 VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING (1) Disconnect connector P173 from connector J173. (2) Set multimeter to volts dc. (3) Connect positive (+) probe of multimeter to connector P173C. (4) Connect negative (-) probe of multimeter to ground. (5) Position main light switch to SER DRIVE (TM 9-2320-365-10) and note reading on multimeter. (6) If 12 vdc is not present, repair or replace wire 2040 between connector J173 and connector splice (para 2-40). (7) Position main light switch to OFF (TM 9-2320-365-10).