TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 459 of 1432
CAUTION Use care when testing electrical connectors. Do not damage connector pins or sockets with multimeter probes. Failure to comply may result in damage to equipment. NOTE Inspect connector pins/sockets for damage, corrosion, and serviceability. Check that connector pins are not pushed back and are capable of making good contact. CONTINUITY TEST TM 9-2320-365-20-2 Change 1 2-1482.29 (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to connector J116 socket E1. (3) Connect negative (-) probe of multimeter to connector J116 socket E2 and note reading on multimeter. (4) If continuity is not present, go to step 14 of this fault.