TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 427 of 1432
VOLTAGE TEST WARNING Change 1 2-1479 Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuits and cause severe burns or electrical shock. TM 9-2320-365-20-2 (1) Remove instrument panel assembly for access (para 7-15). (2) Start engine (TM 9-2320-365-10). (3) Set multimeter to volts DC. (4) Disconnect connector J115 (top connector) from WTEC II TEPSS. (5) Connect positive (+) probe of multimeter to connector J115-2. (6) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (7) Connect positive (+) probe of multimeter to connector J115-11. (8) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (9) If 12 to 14.5 vdc is not present at connector J115-2 and J115-11, replace WTEC II cab transmission harness (para 7-86). (10) Shut down engine (TM 9-2320-365-10).