TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 425 of 1432
(1) Start engine (TM 9-2320-365-10). (2) Set multimeter to volts DC. (3) Connect positive (+) probe of multimeter to connector J116-E1. (4) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (5) Connect positive (+) probe of multimeter to connector J116-E2. (6) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (7) If 12 to 14.5 vdc is not present, replace WTEC II VIM (para 8-6). (8) Shut down engine (TM 9-2320-365-10). VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING Change 1 2-1477 TM 9-2320-365-20-2