TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 39 of 1432
TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 2-1093 2-1093 2-1093 2-1093 2-1093 CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to output terminal of circuit breaker CB8. (3) Connect negative (-) probe of multimeter to wire 415 terminal lug in fan switch S35 outlet box and note reading on multimeter. (4) If continuity is not present, repair or replace 415 (para 2-40). CONTINUITY TEST (1) Loosen terminal 4 screw on fan terminal board. (2) Remove wire 415A from fan terminal board. (3) Set multimeter to ohms. (4) Connect positive (+) probe of multimeter to wire 415A terminal lug. (5) Connect negative (-) probe of multimeter to other end of wire 415A and note reading on multimeter. (6) If continuity is not present, repair or replace wire 415A (para 2-40). (7) Position wire 415A in fan terminal board. (8) Tighten terminal 4 screw on fan terminal board.