TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 359 of 1432
(1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to connector J119j. (3) Connect negative (-) probe of multimeter to connector J115-28 and note reading on multimeter. (4) Connect negative (-) probe of multimeter to all other sockets in connector J115, one at a time, and note reading on multimeter. (5) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (6) If continuity is not present in step 3, or continuity is present in step 4 or step 5, replace WTEC II cab transmission harness (para 7-86). CONTINUITY TEST TM 9-2320-365-20-2 Change 1 2-1413