TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 342 of 1432
f6. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) DISPLAYS MAIN CODE 32 AND ANY SUB CODE KNOWN INFO Fuse OK. Batteries OK. POSSIBLE PROBLEMS Faulty WTEC II cab transmission harness. Faulty WTEC II TEPSS. Replace WTEC II cab transmission harness (para 7-86). YES NO TEST OPTIONS Continuity Test or STE/ICE-R Test #91 REASON FOR QUESTION If continuity is not present from connector J119j to connector J115-27, or continuity is present from J119j to any other J115 sockets or ground, WTEC II cab transmission harness is faulty. 1. Is continuity present from connector J119h and J119j to connector J115-27 and J115-28? CAUTION Read CAUTION on following page. INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Multimeter, Digital (Item 22, Appendix C) Tools and Special Tools (Cont) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Wrench Set, Socket (Item 49, Appendix C) STE/ICE-R (Item 39, Appendix C) References TM 9-4910-571-12&P START TM 9-2320-365-20-2 2-1396 Change 1