TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 275 of 1432
TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 2-1329 2-1329 2-1329 2-1329 2-1329 WARNING Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. VOLTAGE TEST (1) Remove kick panel (para 16-3). (2) Disconnect connector P108 from connector J108. (3) Set multimeter to volts dc. (4) Connect positive (+) probe of multimeter to connector J108-12. (5) Connect negative (-) probe of multimeter to ground. (6) Position master power switch to on (TM 9-2320-365-10) and note reading on multimeter. (7) If 24 vdc is not present, repair wire 2010 (para 2-40) or replace auxiliary panel cable assembly (all models except M1079 w/o winch) (para 7-49) or M1079 w/o winch auxiliary panel cable assembly (par 7-50). (8) Position master power switch to off (TM 9-2320-365-10). (1) Set multimeter to volts dc. (2) Connect positive (+) probe of multimeter to connector J108-16. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If 24 vdc is not present, repair wire 2006 (para 2-40) or replace auxiliary panel cable assembly (all models except M1079 w/o winch) (para 7-49) or M1079 w/o/ winch auxiliary panel cable assembly (para 7-50). (5) Connect connector P108 to connector J108. (6) Install kick panel (para 16-3). VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING