TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 273 of 1432
TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 2-1327 2-1327 2-1327 2-1327 2-1327 WARNING Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. VOLTAGE TEST VOLTAGE TEST Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. WARNING (1) Set multimeter to volts dc. (2) Connect positive (+) probe of multimeter to connector P912-7. (3) Connect negative (-) probe of multimeter to ground. (4) Position master power switch to on (TM 9-2320-365-10) and note reading on multimeter. (5) If 24 vdc is not present, replace lighted indicator display (para 7-16). (6) Position master power switch to off (TM 9-2320-365-10). (1) Set multimeter to volts dc. (2) Connect positive (+) probe of multimeter to connector P912-1. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If 24 vdc is not present, repair wire 2006 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10 or WTEC III dashboard cable assembly (para 7-11). (5) Connect connector P912 to connector J912. (6) Install personnel heater (para 18-9).