TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download

Page 271 of 1432

TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 2-1325 2-1325 2-1325 2-1325 2-1325 CONTINUITY TEST (1) Open van body RH door (TM 9-2320-365-10). (2) Remove four screws from lighted indicator display. (3) Remove lighted indicator display from instrument panel assembly. (4) Disconnect connector PX7 from lighted indicator display. (5) Remove personnel heater for access (para 18-9). (6) Disconnect connector P912 from connector J912. (7) Set multimeter to ohms. (8) Connect positive (+) probe of multimeter to connector PX7-28. (9) Connect negative (-) probe of multimeter to connector P912-7 and note reading on multimeter. (10) If continuity is not present, repair wire 2010 (para 2-40) or replace WTEC II dashboard cable assembly (para 7-10) or WTEC III dashboard cable assembly (para 7-11). (11) Connect connector PX7 to lighted indicator display. (12) Position lighted indicator display in instrument panel assembly with four screws. (13) Tighten four screws to 6-10 lb-in. (1 N·m).