TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download

Page 223 of 1432

TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 2-1277 2-1277 2-1277 2-1277 2-1277 CONTINUITY TEST (1) Disconnect connector P244 from HEATER connector J244. (2) Remove six screws and cover from 110/208 VAC POWER DISTRIBUTION PANEL. (3) Set multimeter to ohms. (4) Connect positive (+) probe of multimeter to output terminal on circuit breaker CB8. (5) Connect negative (-) probe of multimeter to HEATER connector J244 socket A and note reading on multimeter. (6) If continuity is not present, repair or replace wire 400 (para 2-40).