TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 173 of 1432
TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 TM 9-2320-365-20-2 2-1227 2-1227 2-1227 2-1227 2-1227 CONTINUITY TEST (1) Remove 12 screws, lockwashers, and washers from raceway cover. Discard lockwashers. (2) Remove raceway cover from raceway. NOTE (3) Disconnect J connector from P connector. (4) Set multimeter to ohms. (5) Connect positive (+) probe of multimeter to socket 1 of J connector. (6) Connect negative (-) probe of multimeter to pin 2 of J connector and note reading on multimeter. (7) If continuity is not present, replace blackout light (para 16-58). Both blackout lights are tested the same way. Refer to Table 2-14. M1079 Blackout Light Locations and Connector Numbers for details. Blackout Light DS75 shown.