TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 133 of 1432
Change 1 2-1187 TM 9-2320-365-20-2 CONTINUITY TEST (1) Loosen screw in circuit breaker CB5. (2) Remove wire 701A from circuit breaker CB5. (3) Loosen screw in cover. (4) Open cover on relay box assembly. (5) Set multimeter to ohms. (6) Connect positive (+) probe of multimeter to wire 701A. (7) Connect negative (-) probe of multimeter to K35 relay base terminal 7 and note reading on multimeter. (8) If continuity is not present, repair or replace wire 701A (para 2-40). (9) Position wire 701A in circuit breaker CB5. (10) Tighten screw in circuit breaker CB5. (11) Install cover on 110/208 VAC POWER DISTRIBUTION PANEL with six screws.