TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 1207 of 1432
TM 9-2320-365-20-2 3-7. ENGINE OIL FILL TUBE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Transmission oil fill tube removed (para 8-13). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Screwdriver Attachment, Socket Wrench (Item 46, Appendix B) Tools and Special Tools (Cont) Wrench, Torque, 0-200 lb-in. (Item 58, Appendix C) Socket Set, Socket Wrench (Item 35, Appendix C) Materials/Parts Nut, Self-Locking (2) (all models except M1081) (Item 148, Appendix G) Nut, Self-Locking (M1081) (Item 148, Appendix G) a. Removal. (1) Remove cap (1) from engine oil fill tube (2). NOTE Perform steps (2) and (3) on all models except M1081. (2) Remove self-locking nut (3), washer (4), engine oil fill tube (2), screw (5), and washer (6) from radiator overflow tank bracket (7). Discard self-locking nut. (3) Remove self-locking nut (8), washer (9), engine oil fill tube (2), screw (10), and washer (11) from front lifting beam (12). Discard self-locking nut. 3-19