TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 1205 of 1432
TM 9-2320-365-20-2 b. Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Apply antiseize compound to threads of adapter (1). (2) Install adapter (1) on 90-degree fitting (2). (3) Install engine oil sampling hose (3) on adapter (1). NOTE Perform steps (4) and (5) on vehicles equipped with transmission oil cooler tubes. (4) Install preformed packing (4) on 45-degree fitting (5). (5) Install 45-degree fitting (5) in transmission oil cooler tube (6). NOTE Perform step (5.1) and (5.2) on vehicles equipped with transmission oil cooler hoses. (5.1) Apply antiseize compound to threads of 45-degree fitting (5). (5.2) Install 45-degree fitting (5) in transmission oil cooler hose (6). (6) Install transmission oil sampling hose (7) on 45-degree fitting (5). Change 1 3-17