TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 1196 of 1432
TM 9-2320-365-20-2 3-3. VALVE COVER AND GASKET REPLACEMENT (CONT) b. Installation. WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (1) Install engine data plate (1) on valve cover (2) with adhesive. (2) Apply sealing compound between screw holes of valve cover (2). (3) Position valve cover gasket (3) on valve cover (2). NOTE Vehicle serial numbers 0001 through 3091 were originally equipped with valve cover part number 7W5627. Vehicle serial num-bers 3092 and higher serial numbers were originally equipped with valve cover part number 119-2960. If replacing valve cover part number 7W5627 with valve cover part number 119-2960, it will be necessary to use the longer screws. (4) Position valve cover (2) on inlet manifold (4) with 13 washers (5) and screws (6). 3-8