TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download

Page 1190 of 1432

TM 9-2320-365-20-2 Section II. MAINTENANCE PROCEDURES 3-2. LIFTING PLATE REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) Goggles, Industrial (Item 15, Appendix C) Wrench, Torque, 0-175 lb-ft (Item 57, Appendix C) Container (40 qt (38 L) capacity) WARNING Coolant may be very hot and under pressure from engine operation. Ensure engine is cool before performing maintenance. Failure to comply may result in injury to personnel. Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. (1) Remove radiator cap (1) from radiator overflow tank (2). (2) Position container under radiator draincock (3). (3) Open radiator draincock (3) and drain approximately five gallons (19 L) of coolant. (4) Close radiator draincock (3). 3-2