TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 1178 of 1432
TM 9-2320-365-20-2 2-36. GENERAL REMOVAL INSTRUCTIONS (CONT) g. Data Plate Removal. WARNING Wear appropriate eye protection when removing rivets. Failure to comply may result in injury to personnel. CAUTION Use appropriate size drill bit when removing rivets. Failure to comply may cause damage to equipment. Remove rivets and data plate from vehicle. h. Blind Rivet Nut Removal. WARNING Wear appropriate eye protection when removing blind rivet nuts. Failure to comply may result in injury to personnel. CAUTION Use appropriate size drill bit when removing blind rivet nuts. Failure to comply may cause damage to equipment. Remove blind rivet nut from vehicle. 2-37. GENERAL DISASSEMBLY INSTRUCTIONS a. Cleanliness. Work area must be as clean as possible to prevent contamination to components. CAUTION Self-locking fasteners that are loosened must be replaced, not tightened. b. Locking Parts. Replace all lockwashers, cotter pins and self-locking nuts at time of reassembly. c. Expendable Parts. All gaskets, preformed packings, and seals removed during repair must be discarded and replaced with new parts. d. Removing Seals. Be sure all traces of oil, gaskets and sealants are removed from components. When possible, use wood or plastic probes and scrapers to prevent damage to machined surfaces. 2-2128