TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 1083 of 1432
VOLTAGE TEST WARNING Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuits and cause severe burns or electrical shock. Change 2 2-1993 (1) Remove dust boot from terminal lug TL15. (2) Set multimeter to volts DC. (3) Connect positive (+) probe of multimeter to terminal lug TL15. (4) Connect negative (-) probe of multimeter to known good ground. (5) Position master power switch to on (TM 9-2320-365-10) and note reading on multimeter. (6) Position master power switch to off (TM 9-2320-365-10). (7) If 24 VDC is not present, replace power cable from terminal lug TL15 to terminal lug TL22 (para 20-88). (8) If 24 VDC is present, replace Power Distribution Panel (PD2) (para 20-88). TM 9-2320-365-20-2