TM-9-2320-365-20-2 LMTV Unit Maintenance Manual M1078 Series - Volume 2 Download
Page 1024 of 1432
KNOWN INFO TEST OPTIONS Pressure Test or STE/ICE-R Test #51 REASON FOR QUESTION This question eliminates possible problems and determines where troubleshooting continues. WARNING Read WARNING on following page. 1. Other hydraulic manifold functions OK. Hydraulic hoses free from leaks. POSSIBLE PROBLEMS Faulty hydraulic hose(s) 508 and/or 510. Faulty suspension compression tee fitting. Faulty air/hydraulic manifold. Faulty hydraulic hose 512. Faulty hydraulic hose 513. Faulty suspension release tee fitting. Faulty suspension cylinder(s). Faulty hydraulic hose(s) 509 and/or 511. Is 2,500-4,000 psi (17,238-27,580 kPa) present at suspension cylinder input ports? INITIAL SETUP Equipment Condition Engine shut down (TM 9-2320-365-10). Personnel Required (2) Material/Parts Rag, Wiping (Item 51, Appendix D) Tools and Special Tools Tool Kit, Genl Mech (Item 44, Appendix C) STE/ICE-R (Item 39, Appendix C) Pan, Drain (Item 24, Appendix C) Goggles, Industrial (Item 15, Appendix C) Transducer, 10,000 PSI (Item 1, Appendix J) Gloves, Rubber (Item 13, Appendix C) References TM 9-4910-571-12&P TM 9-2320-365-20-2 2-1970 Change 1 t2. SUSPENSION DOES NOT COMPRESS AND/OR RETURN TO NORMAL START NO YES Go to step 3 of this fault.