TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 995 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-609 2-609 2-609 2-609 2-609 CONTINUITY TEST CONTINUITY TEST (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to lamp socket. (3) Connect negative (-) probe of multimeter to ground and note reading on multimeter. (4) If continuity is not present, repair wire 3091 (para 2-40) or replace front lights cable assembly (para 7-74). (1) Set multimeter to ohms. (2) Connect positive (+) probe of multimeter to inside of blackout drive light housing. (3) Connect negative (-) probe of multimeter to lamp socket and note reading on multimeter. (4) If continuity is not present, replace blackout drive light (para 7-30). (5) If continuity is present, replace lamp (para 7-30). (6) Install lamp in socket. (7) Install gasket and cover on housing with three screws.