TM-9-2320-365-20-1 LMTV Unit Maintenance Manual M1078 Series - Volume 1 Download
Page 991 of 1760
TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 TM 9-2320-365-20-1 2-605 2-605 2-605 2-605 2-605 WARNING Remove rings, bracelets, watches, necklaces, and any other jewelry before working around vehicle. Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe burns or electrical shock. VOLTAGE TEST (1) Disconnect connector P24 (LH composite front light assembly) or connector P8 (RH composite front assembly) from composite front assembly connector. (2) Set multimeter to ohms. (3) Connect positive (+) probe of multimeter to connector P24 or connector P8. (4) Connect negative (-) probe of multimeter to ground. (5) Position main light switch to BO MARKER (TM 9-2320-365-10) and note reading on multimeter. (6) If 12 vdc is not present, repair wire 20 or 20A (para 2-40) or replace front lights cable assembly (para 7-74). (7) Position main light switch to OFF (TM 9-2320-365-10). (8) Connect connector P24 or connector P8 to composite front light assembly connector.